"After Hurricane Ian, our roof and lanai were a mess. They were on-site within a week, soft-washed the tile roof, knocked the salt and silt off the screen cage, and didn't blow out a single panel. Five-star work."
Linda H.
Cape Coral, FL
Material-specific fence cleaning for wood, vinyl, and aluminum that removes algae, mildew, and grime without splintering or oxidation.
Each fence material wants a different approach. Wood fences get low-pressure soft wash so the grain stays intact and ready for stain or sealer follow-up. Vinyl gets a chemistry-led wash to lift mildew without pressure marks. Aluminum gets an oxidation neutralizer for that chalky residue. Bundle with house wash or driveway for a meaningful savings.
There is no single “fence cleaning” method. Wood, vinyl, and aluminum each react differently to pressure and chemistry — and the wrong method on the wrong material does permanent visible damage.
The shortcut most operators take is to pressure-wash everything at high PSI. The result on wood: splintered grain that traps more dirt and shortens fence life. The result on vinyl: visible spray-pattern stripes that never come off. The result on aluminum: surface scratches and accelerated oxidation.
Our approach is material-specific.
Florida sun and rain weather wood fast — grey patina within 18 months, deep grain weathering by year 3-5. Annual cleaning keeps the wood healthier and ready for stain or sealer if you want to extend the fence life.
If you are planning to stain or seal the fence after cleaning, we recommend waiting 48-72 hours for the wood to dry fully before stain application.
Vinyl fences in SWFL grow green algae on the shade side and pick up mildew along the bottom rail where moisture sits. Pressure washing leaves spray-pattern marks that are permanent.
Aluminum fence pickets develop oxidation — that chalky white residue you can rub off with your finger. Pressure washing alone makes it worse by abrading the surface and exposing more aluminum to oxidation.
Most fence projects make sense as bundles. Common combinations:
Bundle discounts are meaningful — usually 15-25% off the fence portion when combined with another service.
A fence that looks 5 years younger, cleaned with a method matched to your material, ready for stain or sealer follow-up if applicable, and a 100% satisfaction guarantee.
Most Cape Coral fence cleans land between $150 and $450 depending on linear footage and material. Free quote returns within one business day.
Real properties around Southwest Florida, before and after.



Tell us what needs cleaning. We respond within one business day with a transparent, line-itemed estimate. If you're not happy with the finished work, we re-clean the area at no cost.
"After Hurricane Ian, our roof and lanai were a mess. They were on-site within a week, soft-washed the tile roof, knocked the salt and silt off the screen cage, and didn't blow out a single panel. Five-star work."
Linda H.
Cape Coral, FL
"Hired them for paver sealing in our Cape Harbour driveway. They cleaned, swept in fresh polymeric sand, then applied a wet-look sealer. Three years later it still looks the day they left."
Mark T.
Cape Harbour
"Solar panel cleaning made an actual difference on our monitoring app — output is back to where it was when they were new. They scheduled around mid-day production and were in and out in under two hours."
Priya R.
Fort Myers, FL
High-pressure washing splinters wood and lifts the grain — leaves the fence rougher than before and shortens its life. We use low-pressure soft wash with chemistry. The wood comes out clean, the grain stays intact, and the surface is ready for stain or sealer if you want to follow up.
Yes. Vinyl fences need chemistry, not force. High pressure on vinyl leaves visible spray-pattern marks that don't come off. We use a soft-wash biocide to kill mildew, then a low-pressure rinse — no pressure marks.
That chalky residue is aluminum oxidation. Pressure washing makes it worse. We apply an oxidation neutralizer that breaks down the chalk, then rinse clean. Brings the aluminum back to a uniform sheen.
Wood needs soft wash to preserve grain. Vinyl needs chemistry. Aluminum needs oxidation neutralizer. Each explained.
Read guide GuideSWFL humidity grows fence algae fast. Biocide-led soft wash removes without splintering wood or oxidizing aluminum.
Read guideComplete soft-wash exterior cleaning that strips mold, mildew, and grime from stucco, vinyl, brick, and painted siding without damaging paint or landscaping.
Learn moreHigh-pressure rotary surface cleaning that strips oil, tire marks, mold, and ground-in dirt from driveways, walkways, patios, and concrete pool decks.
Learn moreMulti-step clean-sand-seal process restores faded pavers, stabilizes joints with polymeric sand, and locks the finish with a UV-blocking sealer.
Learn more
Free instant quote, no hidden charges. Most jobs scheduled within 5-7 days of acceptance.